Skip to Content
DN80 (3" NB) PN16 FULL FACE GASKET 3mm EPDM
Suits an outside diameter (OD) of: 88.9mm or 76.2mm
Material: Rubber
Grade: EPDM
Standards: EN1092-1
Bolt Holes: 8 off to suit M16 Bolts
PCD: 160mm
Flange Diameter: 200mm
Gasket Thickness: 3mm
Price on enquiry 0.0 GBP
DN80 (3" NB) PN16 RF BLANK FLANGE D&T DN15 (1/2") BSPP CS A105N
Drilled and Tapped Blanking / Blind Flange
Material: CS
Grade: A105N
Standards: EN1092-1 PN16
Flange Face: Raised
Bolt Holes: 8 off to suit M16 Bolts
PCD: 160mm
Flange Diameter: 200mm
Flange Thickness: 20mm
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Blind, Blank, Blanking Flange, Mild steel, Carbon Steel, Termination, RFB, Tapped, Test Plate
£ 448.00 448.0 GBP
DN80 (3" NB) PN16 RF SLIP ON PLATE FLANGE CS A105 N
Suits an outside diameter (OD) of: 88.9mm
Material: MS
Grade: A105 N
Standards: EN1092-1
Flange Face: Raised
Bolt Holes: 8 off to suit M16 Bolts
PCD: 160mm
Flange Diameter: 200mm
Flange Thickness: 20mm
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Slip on, Plate Flange, Weld on, Mild Steel, Carbon Steel
£ 77.00 77.0 GBP
DN80 (3" NB) PN16 RF SLIP ON PLATE FLANGE CS S235 JR
Suits an outside diameter (OD) of: 88.9mm
Material: Mild Steel
Grade: S235 JR
Standards: EN1092-1
Flange Face: Raised
Bolt Holes: 8 off to suit M16 Bolts
PCD: 160mm
Flange Diameter: 200mm
Flange Thickness: 20mm
Certification Available: 2.1 BS EN 10204 Material Certification

Alternative Terminology:
Slip on, Weld on, Plate Flange, RFSO, Mild Steel, Carbon Steel
£ 30.10 30.1 GBP
DN80 (3" NB) PN16 RF SLIP ON PLATE FLANGE SS 316
Suits an outside diameter (OD) of:88.9mm
Material: Stainless
Grade: 316
Standards: EN1092-1
Flange Face: Raised
Bolt Holes: 8 off to suit M16 Bolts
PCD: 160mm
Flange Diameter: 200mm
Flange Thickness: 20mm
Certification Available: 3.1 BS EN 10204 Material Certification
£ 162.40 162.4 GBP
DN80 (3" NB) PN16/ASA150 WAFER PATTERN SPRING CHECK VALVE SS 316
Suits an outside diameter (OD) of: 88.9mm
Construction: Spring assisted
Body Material: 316 Stainless
Wafer patter to suit flanges: PN16 & ASA150 (ANSI150)
£ 706.79 706.79 GBP
DN100 (4" NB) ASA150 FLANGED 2PC LEVER OP. BALL VALVE LEVER OP SS 316
Flanged both ends: 4" ASA 150
Suits an outside diameter (OD) of: 114.3mm
PCD: 190.5mm Ø (ANSI 150)
Face to face: 229mm
Construction: 2 Piece
Body Material: CF8/CF8M (316) Stainless
Bore: Full Bore
Internals: PTFE Seals
Investment Casting
Blowout proof stem
£ 2,740.01 2740.01 GBP
DN100 (4" NB) ASA150 RF BLANK FLANGE CS A105N
Blanking / Blind Flange
Material: Carbon Steel
Grade: A105N
Standards: ASME B16.9 / ASA150
Flange Face: Raised
Bolt Holes: 8 off 19mm Ø
PCD: 190.5mm
Flange Diameter: 228.6mm
Flange Thickness: 23.8mm
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Blind, Blank, Blanking Flange, Mild steel, Carbon Steel, Termination, RFB
£ 82.60 82.6 GBP
DN100 (4" NB) ASA150 RF SLIP ON BOSSED FLANGE SS 304
Suits an outside diameter (OD) of: 114.3mm
Material: Stainless
Grade: 304
Standards: ASME B16.9 / ASA150
Flange Face: Raised
Bolt Holes: 8 off to suit 5/8"⌀ or M16 Bolts
PCD: 190.5mm
Flange Diameter: 228.6mm
Flange Thickness: 23.8mm
Certification Available: 3.1 BS EN 10204 Material Certification
£ 217.00 217.0 GBP
DN100 (4" NB) ASA150 RF SLIP ON PLATE FLANGE SS 316
Suits an outside diameter (OD) of: 114.3mm
Material: Stainless
Grade: 316
Standards: ASME B16.9 / ASA150
Flange Face: Raised
Bolt Holes: 8 off to suit 3/4"⌀ or M16 Bolts
PCD: 190.5mm
Flange Diameter: 228.6mm
Flange Thickness: 23.8mm
Certification Available: 3.1 BS EN 10204 Material Certification
Price on enquiry 0.0 GBP
DN100 (4" NB) ASA150 SCHEDULE 40s RF WELD NECK FLANGE SS 304
Suits an outside diameter (OD) of: 114.3mm
Suits Wall Thickness (WT): Schedule 40s
Material: Stainless
Grade: 304
Standards: ASME B16.9 / ASA150
Flange Face: Raised
Bolt Holes: 8 off to suit 5/8"⌀ or M16 Bolts
PCD: 190.5mm
Flange Diameter: 228.6mm
Flange Thickness: 23.8mm
Certification Available: 3.1 BS EN 10204 Material Certification
£ 287.00 287.0 GBP
DN100 (4" NB) ASA600 RF BLANK FLANGE CS A105N
Blanking / Blind Flange
Material: Carbon Steel
Grade: A105N
Standards: ASME B16.9 / ASA600
Flange Face: Raised
Bolt Holes: 8 off 25.4mm Ø
PCD: 215.9mm
Flange Diameter: 273mm
Flange Thickness: 38.1mm
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Blind, Blank, ANSI, ASM, ASA, Class 600, Blanking Flange, Mild steel, Carbon Steel, Termination, RFB
£ 343.00 343.0 GBP
DN100 (4" NB) FEMALE ELBOW 90° X DN100 (4" NB) PN16 FLANGE GALV. LEVERLOCK (WITH O RING)
End 1: 4" Female Leverlock 90° Elbow / Bend to suit 4" Counterpart (Male) Leverlock
End 2: 4" NB PN16 Flanged to suit an outside diameter (OD) of: 114.3mm
Flanged End Specification:
Standards: EN1092-1
Flange Face: Flat
Bolt Holes: 8 off to suit M16 Bolts
PCD: 180mm
Flange Diameter: 220mm
Flange Thickness: 20mm
Material: MS
Finish: Galvanised

Alternative terminology:
Male Flanged Bauer Coupling, Lever Lock Coupling, Tanker Coupling
£ 165.20 165.2 GBP
DN100 (4" NB) IMPERIAL SOLVENT ABS STUB FLANGE
Side One Connection: 4" NB Solvent
Side One suits an outside diameter (OD) of: 114.3mm

Side Two Connection: To be used with a 4" (DN100) 114.3mm Backing Ring

Material: ABS
£ 37.80 37.8 GBP
DN100 (4" NB) IMPERIAL SOLVENT PVC-U STUB FLANGE
Side One Connection: 4" NB Solvent
Side One suits an outside diameter (OD) of: 114.3mm

Side Two Connection: To be used with a 4" (DN100) 114.3mm Backing Ring

Material: PVC-U
£ 35.91 35.91 GBP
DN100 (4" NB) MALE ELBOW 90° X DN100 (4" NB) PN16 FLANGE GALV. LEVERLOCK (WITH LEVER)
End 1: 4" Male Leverlock 90° Elbow / Bend to suit 4" Counterpart (Female) Leverlock
End 2: 4" NB PN16 Flanged to suit an outside diameter (OD) of: 114.3mm
Flanged End Specification:
Standards: EN1092-1
Flange Face: Flat
Bolt Holes: 8 off to suit M16 Bolts
PCD: 180mm
Flange Diameter: 220mm
Flange Thickness: 20mm
Material: MS
Finish: Galvanised

Alternative terminology:
Male Flanged Bauer Coupling, Lever Lock Coupling, Tanker Coupling
£ 395.57 395.57 GBP
DN100 (4" NB) MALE LEVERLOCK X DN100 (4" NB) PN16 FLANGE GALV. LEVERLOCK (WITH LEVER)
End 1: 4" Male Leverlock to suit 4" Counterpart (Female) Leverlock
End 2: 4" NB PN16 Flanged to suit an outside diameter (OD) of: 114.3mm
Material: MS
Finish: Galvanised

Alternative terminology:
Male Flanged Bauer Coupling, Lever Lock Coupling, Tanker Coupling
£ 196.00 196.0 GBP
DN100 (4" NB) PN10/16 (104mm) DEDICATED (STAINLESS METRIC) FLANGE ADAPTOR
Closing Range on Pipe Diameter: 104mm (Stainless Metric)
Working Pressure: 16 Bar
£ 840.00 840.0 GBP
DN100 (4" NB) PN10/16 (107-130mm) DEDICATED VIKING JOHNSON FLANGE ADAPTOR
Closing Range on Pipe Diameter: 107-130mm
Working Pressure: 16 Bar
£ 321.44 321.44 GBP
DN100 (4" NB) PN10/16 IMPERIAL GALVANISED BACKING RING
Suits an outside diameter stub flange (OD) of: 114.3mm
Material: Galvanised MS
Grade: S235 JR
Standards: EN1092-1
Flange Face: Flat
Bolt Holes: 8 off to suit M16 Bolts
PCD: 180mm
Flange Diameter: 220mm
Thickness: 7.3mm
£ 88.90 88.9 GBP
DN100 (4" NB) PN10/16/ASA150 WAFER PATTERN DISC CHECK VALVE SS 316
Suits an outside diameter (OD) of: 114.3mm
Construction: Disc / Spring assisted
Body Material: 316 Stainless
Wafer patter to suit flanges: PN16 & ASA150 (ANSI150)
£ 644.00 644.0 GBP
DN100 (4" NB) PN16 C/I BI-DIRECTIONAL KNIFE EDGE GATE VALVE
Suits an outside diameter (OD) of: 114.3mm
Body Material: Cast Iron
Gate Material: SS 304
Seat: EPDM

To suit flanges: PN16
Pressure Class: 10 Bar
Face to Face: 50mm
Operation: Handwheel Operated
Design Standard: PN10
£ 1,505.00 1505.0 GBP
DN100 (4" NB) PN16 C/I ORBINOX EBA BI-DIRECTIONAL KNIFE EDGE GATE VALVE
Suits an outside diameter (OD) of: 114.3mm
Body Material: Cast Iron (EN GJS 400-15)
Gate Material: SS 304
Seat: NBR
Stem: Rising

Working pressure (Bar) - 10 (16*)
Required Torque (Nm) - 10
Stem (mm) - 20x4
ISO-Top - F10
Approx No. of Turns - 28
Time (sec)@45rpm - 37

To suit flanges: PN16
Pressure Class: 16 Bar
Face to Face: 52mm
Operation: Ready for Rotork Electric Actuator
Design Standard: PN16
£ 2,975.00 2975.0 GBP
DN100 (4" NB) PN16 C/I UNI-DIRECTIONAL KNIFE EDGE GATE VALVE
Suits an outside diameter (OD) of: 114.3mm
Body Material: Cast Iron
Gate Material: SS 304
Seat: EPDM

To suit flanges: PN16
Pressure Class: 10 Bar
Face to Face: 50mm
Operation: Handwheel Operated
Design Standard: PN10
£ 891.10 891.1 GBP
DN100 (4" NB) PN16 CHAMF. FF BACKING RING BORED 106mm ID 10mm THK BZP
Suits an outside diameter (OD) of: 104mm
Material: MS
Grade: S235 JR
Standards: EN1092-1
Flange Face: Flat
Bolt Holes: 8 off to suit M16 Bolts
PCD: 180mm
Flange Diameter: 220mm
Flange Thickness: 10mm
£ 35.00 35.0 GBP
DN100 (4" NB) PN16 CHAMF. FF BACKING RING BORED 106mm ID 12.7mm THK SS 304
Suits an outside diameter (OD) of: 104mm
Material: SS
Grade: 304
Standards: EN1092-1
Flange Face: Flat
Bolt Holes: 8 off to suit M16 Bolts
PCD: 180mm
Flange Diameter: 220mm
Flange Thickness: 12.7mm
£ 173.25 173.25 GBP
DN100 (4" NB) PN16 FLANGED 2PC BALL VALVE SS 316 BAR HANDLE
Suits an outside diameter (OD) of: 114.3mm
Construction: 2 Piece
Body Material: Stainless 316
To suit flanges: PN16
Face to Face: 190mm
Topworks: Lockable ISO direct mount, ISO5211
Approvals: Fire Safe, Anti-Static, TUV Casting,
Design Standard: EN 12516-1
Inspection & Testing : EN12266-1
Features: Blowout proof stem

Supplied with optional Bar handle
£ 3,822.00 3822.0 GBP
DN100 (4" NB) PN16 FLANGED 2PC BALL VALVE SS 316 BAR HANDLE
Suits an outside diameter (OD) of: 114.3mm
Construction: 2 Piece
Body Material: Stainless 316
To suit flanges: PN16
Face to Face: 190mm
Topworks: Lockable ISO direct mount, ISO5211
Approvals: Fire Safe, Anti-Static, TUV Casting,
Design Standard: EN 12516-1
Inspection & Testing : EN12266-1
Features: Blowout proof stem
£ 853.23 853.23 GBP
DN100 (4" NB) PN16 FLANGED 2PC LEVER OP. BALL VALVE LEVER OP SS 316
Flanged both ends: 4" PN16
Suits an outside diameter (OD) of: 114.3mm
PCD: 180mm Ø (PN16)
Face to face: 190mm
Construction: 2 Piece
Body Material: CF8/CF8M (316) Stainless
Bore: Full Bore
Internals: PTFE Seals
Investment Casting
Blowout proof stem
£ 2,650.13 2650.13 GBP
DN100 (4" NB) PN16 FLANGED CAST IRON SWING CHECK VALVE
Suits an outside diameter (OD) of: 114.3mm
Construction: Flanged Cast Iron Check / Non-Return (NRV) Valve
Body Material: Cast Iron
Seat Material: Metal
To suit flanges: PN16
Face to Face: 192mm
Operation: Self Operating
Design Standard: Face to face BS1513 / BS EN558-1
£ 883.96 883.96 GBP
DN100 (4" NB) PN16 FLANGED DUCTILE IRON SWEPT BEND 90° LONG RADIUS RED OXIDE EN598
Outside Diameter (OD): 118mm
Wall Thickness (WT): 4.4mm
Material: Ductile Iron
Standards: EN598
Construction: Cast
Finish: Red Painted
Ends: Flanged PN16

Applications:
Waste Water Treatment Plant

Alternative terminology:
Ductile iron, Red Oxide / Epoxy, EN598, Waste, Bend, Elbow, 90°
£ 478.80 478.8 GBP
DN100 (4" NB) PN16 FLANGED DUCTILE IRON SWEPT BEND 90° LONG RADIUS RED OXIDE EN598 (WITH INSPECTION HATCH)
Outside Diameter (OD): 118mm
Wall Thickness (WT): 4.4mm
Material: Ductile Iron
Standards: EN598
Construction: Cast
Finish: Red Painted
Ends: Flanged PN16

Applications:
Waste Water Treatment Plant

Alternative terminology:
Ductile iron, Red Oxide / Epoxy, EN598, Waste, Bend, Elbow, 90°
£ 2,911.02 2911.02 GBP
DN100 (4" NB) PN16 FULL FACE GASKET 3mm EPDM
Suits an outside diameter (OD) of: 114.3mm, 104mm or 101.6mm
Material: Rubber
Grade: EPDM
Standards: EN1092-1
Bolt Holes: 8 off to suit M16 Bolts
PCD: 180mm
Flange Diameter: 220mm
Gasket Thickness: 3mm
£ 8.40 8.4 GBP
DN100 (4" NB) PN16 RF BLANK FLANGE D&T 15NB (1/2" NB) BSPP SS 316
Drilled and Tapped Blanking / Blind Flange
Material: Stainless
Grade: 316
Standards: PN16 EN1092-1
Flange Face: Raised
Bolt Holes: 8 off to suit M16 Bolts
PCD: 180mm
Flange Diameter: 220mm
Flange Thickness: 20mm
Certification Available: 3.1 BS EN 10204 Material Certification
£ 296.17 296.17 GBP
DN100 (4" NB) PN16 RF SLIP ON PLATE FLANGE CS S235 JR
Suits an outside diameter (OD) of: 114.3mm
Material: MS
Grade: S235 JR
Standards: EN1092-1
Flange Face: Raised
Bolt Holes: 8 off to suit M16 Bolts
PCD: 180mm
Flange Diameter: 220mm
Flange Thickness: 20mm
Certification Available: 2.1 BS EN 10204 Material Certification

Alternative Terminology:
Slip on, Weld on, Plate Flange, RFSO, Mild Steel, Carbon Steel
£ 34.65 34.65 GBP
DN100 (4" NB) PN16 RF SLIP ON PLATE FLANGE SS 316
Suits an outside diameter (OD) of: 114.3mm
Material: Stainless
Grade: 316
Standards: EN1092-1
Flange Face: Raised
Bolt Holes: 8 off to suit M16 Bolts
PCD: 180mm
Flange Diameter: 220mm
Flange Thickness: 22mm
Certification Available: 3.1 BS EN 10204 Material Certification
£ 88.90 88.9 GBP
DN100 (4" NB) PN16 WAFER PATTERN LEVER OP. BUTTERFLY VALVE (EPDM/SS) CAST IRON
Suits an outside diameter (OD) of: 114.3mm
Body Material: Cast Iron
Disc Material: 316 Stainless
Connection: Wafer Flange
Liner: EPDM

Applications:
HVAC, Mechanical, Heating and cooling, Water Treatment, Waste Water, Chemicals.

Alternative terminology:
Isolation Valve, 1/4 Turn, Butterfly, Wafer Pattern,
£ 357.98 357.98 GBP
DN100 (4" NB) TABLE D/E IMPERIAL GALVANISED BACKING RING
Suits an outside diameter stub flange (OD) of: 114.3mm
Material: Galvanised MS
Grade: S235 JR
Standards: EN1092-1
Flange Face: Flat
Bolt Holes: 4 off to suit M16 Bolts
PCD: 178mm
Flange Diameter: 216mm
Thickness: 7.3mm
£ 80.22 80.22 GBP