Skip to Content

Pipework Store

List 600
  • Mild Steel
  • Stainless
  • Valves
  • Plastic
  • More
DN15 X 8 (1/2" X 1/4" NB) NPT 3000# FS GALVANISED HEX REDUCING BUSH A105N
Thread Side 1: 1/2" NPT Male
Suits an outside diameter (OD) of: 21.3mm
Thread Side 2: 1/4" NPT Female
Suits an outside diameter (OD) of: 13.72mm
Material: Forged Steel
Grade: A105N
Construction: Forged
Finish: Galvanised
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Reducing Bush, MXF, Hex Bush, Carbon Steel
£ 13.30 13.3 GBP
DN15 X 10 (1/2" X 3/8" NB) BSP 150# REDUCING HEX NIPPLE SS 316
£ 6.09 6.09 GBP
DN15 X 10 (1/2" X 3/8" NB) BSP 150# REDUCING SOCKET SS 316
Side One Thread: 1/2" BSP Female
Suits an outside diameter (OD) of: 21.3mm
Side Two Thread: 3/8" BSP Female
Suits an outside diameter (OD) of: 17.15mm
Material: Stainless
Grade: 316
£ 7.35 7.35 GBP
DN15 X 10 (1/2" X 3/8" NB) BSP BLACK MALLEABLE IRON REDUCING BRANCH TEE
Run threads: 1/2" BSPP Female
Suits an outside diameter (OD) of: 21.3mm
Branch Thread: 3/8" BSPP Female
Suits an outside diameter (OD) of: 17.15mm

Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Reducing Branch, Tee, Threaded, Screwed
£ 5.18 5.18 GBP
DN15 X 10 (1/2" X 3/8" NB) BSP BLACK MALLEABLE IRON REDUCING HEX NIPPLE
Side 1 Thread: 1/2" BSPT Male x Male
Suits an outside diameter (OD) of: 21.3mm
Side 2 Thread: 3/8" BSPT Male x Male
Suits an outside diameter (OD) of: 17.15mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Reducing Heagon Nipple, Malleable, Iron, Threaded, Screwed, Figure 245, Fittings.
£ 4.41 4.41 GBP
DN15 X 10 (1/2" X 3/8" NB) BSP BLACK MALLEABLE IRON REDUCING SOCKET
Side 1 threaded: 1/2" BSPP Female
Side 1 suits an outside diameter (OD) of: 21.3mm

Side 2 threaded: 3/8" BSPP Female
Side 2 suits an outside diameter (OD) of: 17.15mm

Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Reducing Socket, Concentric, Coupling, Connector, Threaded, Screwed, Figure 240, Fittings.
£ 3.64 3.64 GBP
DN15 X 10 (1/2" X 3/8" NB) BSP GALVANISED MALLEABLE IRON REDUCING SOCKET
Side 1 threaded: 1/2" BSPP Female
Side 1 suits an outside diameter (OD) of: 21.3mm

Side 2 threaded: 3/8" BSPP Female
Side 2 suits an outside diameter (OD) of: 17.15mm

Material: Malleable Iron
Finish: Galvanised

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Reducing Socket, Concentric, Coupling, Connector, Threaded, Screwed, Figure 240, Fittings.
£ 4.41 4.41 GBP
DN15 X 10 (1/2" X 3/8" NB) NPT 3000# FS GALVANISED HEX REDUCING BUSH A105N
Thread Side 1: 1/2" NPT Male
Suits an outside diameter (OD) of: 21.3mm
Thread Side 2: 3/8" NPT Female
Suits an outside diameter (OD) of: 17.15mm
Material: Forged Steel
Grade: A105N
Construction: Forged
Finish: Galvanised
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Reducing Bush, MXF, Hex Bush, Carbon Steel
£ 14.00 14.0 GBP
DN15 X 20 (1/2" X 3/4" NB) BSP SPIRAX SV614AS SAFETY VALVE (SET: 2.4 BAR) BRONZE BODY
£ 1,680.00 1680.0 GBP
DN15 X 8 (1/2" X 1/4" NB) BSP 150# REDUCING SOCKET SS 316
Side One Thread: 1/2" BSP Female
Suits an outside diameter (OD) of: 21.3mm
Side Two Thread: 1/4" BSP Female
Suits an outside diameter (OD) of: 13.72mm
Material: Stainless
Grade: 316
£ 7.35 7.35 GBP
DN15 X 8 (1/2" X 1/4" NB) BSP BLACK MALLEABLE IRON REDUCING BRANCH TEE
Run threads: 1/2" BSPP Female
Suits an outside diameter (OD) of: 21.3mm
Branch Thread: 1/4" BSPP Female
Suits an outside diameter (OD) of: 13.72mm

Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Reducing Branch, Tee, Threaded, Screwed
£ 6.30 6.3 GBP
DN15 X 8 (1/2" X 1/4" NB) BSP BLACK MALLEABLE IRON REDUCING HEX NIPPLE
Side 1 Thread: 1/2" BSPT Male x Male
Suits an outside diameter (OD) of: 21.3mm
Side 2 Thread: 1/4" BSPT Male x Male
Suits an outside diameter (OD) of: 13.72mm
Material: Malleable Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi, Malleable Iron, EN 10242 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Reducing Heagon Nipple, Malleable, Iron, Threaded, Screwed, Figure 245, Fittings.
£ 5.95 5.95 GBP
DN15 X 8 (1/2" X 1/8" NB) BSP 150# REDUCING SOCKET SS 316
Side One Thread: 1/2" BSP Female
Suits an outside diameter (OD) of: 21.3mm
Side Two Thread: 1/8" BSP Female
Suits an outside diameter (OD) of: 10.29mm
Material: Stainless
Grade: 316
£ 7.35 7.35 GBP
DN15 x 8 (1/2" X 1/4" NB) NPT 3000 SERIES REDUCING BUSH MXF SS 316
Thread Side 1: 1/2" NPT Male
Suits an outside diameter (OD) of: 21.3mm
Thread Side 2: 1/4" NPT Female
Suits an outside diameter (OD) of: 13.7mm
Material: Stainless
Grade: 316

Price on enquiry 0.0 GBP
DN15 x 8 (1/2" X 1/4" NB) NPT BRASS REDUCING BUSH
Brass Reducing Bush
Side One: 1/2" Male NPT Thread
Side One: 1/4" Female NPT Thread
£ 30.31 30.31 GBP
DN20 (3/4" NB) HANDRAIL EN10255 PLAIN END GALVANISED PIPE
Outside Diameter (OD): 26.9mm
Wall Thickness (WT): 2.2mm
Material: MS
Grade: S235
Standards: EN10255 (BS1387), EN10217 (2019) P1 & P2
Standard Length: 6.4 meters
Weight Per Meter: 1.96kg
Construction: Welded
Finish: Hot Dip Galvanised
Ends: Plain ended

Note: Sold online only in 1 meter increments. Please get in touch for specific cutting requirements.

Price on enquiry 0.0 GBP
DN20 (3/4" NB) MEDIUM WT EN10255 PLAIN END GALVANISED PIPE
Outside Diameter (OD): 26.9mm
Wall Thickness (WT): 2.6mm
Material: MS
Grade: S235
Standards: EN10255 (BS1387), EN10217 (2019) P1 & P2
Standard Length: 6.4 meters
Weight Per Meter: 1.56kg
Construction: Welded
Finish: Hot Dip Galvanised
Ends: Plain both ends
Certification: 2.1 Material Certification
Price on enquiry 0.0 GBP
DN20 (3/4" NB) MEDIUM WT EN10255 PLAIN END RED OXIDE PIPE
Outside Diameter (OD): 26.9mm
Wall Thickness (WT): 2.6mm
Material: MS
Grade: S235
Standards: EN10255 (BS1387), EN10217 (2019) P1 & P2
Standard Length: 6.4 meters
Weight Per Meter: 1.56kg
Construction: Welded
Finish: Red Oxide Painted
Ends: Plain Both Ends

Note: Sold online only in 1 meter increments. Please get in touch for specific cutting requirements.

Price on enquiry 0.0 GBP
DN20 (3/4" NB) MEDIUM WT EN10255 PLAIN END SELD COLOUR PIPE
Outside Diameter (OD): 26.9mm
Wall Thickness (WT): 2.6mm
Material: MS
Grade: S235
Standards: EN10255 (BS1387), EN10217 (2019) P1 & P2
Standard Length: 6.4 meters
Weight Per Meter: 1.56kg
Construction: Welded
Finish: Self Colour / Black 'as is' Finish
Ends: Plain both ends

Note: Sold online only in 1 meter increments. Please get in touch for specific cutting requirements.
Price on enquiry 0.0 GBP
DN20 (3/4" NB) MEDIUM WT EN10255 SCREWED & SOCKETED GALVANISED PIPE
Outside Diameter (OD): 26.9mm
Wall Thickness (WT): 2.6mm
Material: MS
Grade: S235
Standards: EN10255 (BS1387), EN10217 (2019) P1 & P2
Standard Length: 6.4 meters
Weight Per Meter: 1.57kg
Construction: Welded
Finish: Hot Dip Galvanised
Ends: Threaded BSPT both ends with 1x BSP Socket

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Compressed Air, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Screwed and Socketed / Coupled, BS1387, Medium Weight, Pipe.

Note: Sold online only in 1 meter increments. Please get in touch for specific cutting requirements.

Price on enquiry 0.0 GBP
DN20 (3/4" NB) MEDIUM WT EN10255 SCREWED & SOCKETED RED OXIDE PIPE
Outside Diameter (OD): 26.9mm
Wall Thickness (WT): 2.6mm
Material: MS
Grade: S235
Standards: EN10255 (BS1387), EN10217 (2019) P1 & P2
Standard Length: 6.4 meters
Weight Per Meter: 1.57kg
Construction: Welded
Finish: Red Oxide
Ends: Threaded BSPT both ends with 1x BSP Socket

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Compressed Air, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Threaded, Screwed and Socketed / Coupled, BS1387, Medium Weight, Pipe.

Note: Sold online only in 1 meter increments. Please get in touch for specific cutting requirements.

Price on enquiry 0.0 GBP
DN20 (3/4" NB) 3PC SOCKET WELD 3PC FB BALL VALVE LEVER OP. SS 316
Threaded: 3/4" NB Socket Weld (SW)
Suits an outside diameter (OD) of: 26.9mm
Construction: 3 Piece
Body Material: 316 Stainless
Connection: Socket Weld
Bore: Full Bore
Internals: PTFE Seals

Applications:
Water, Oil & Gas* - Heating and Plumbing, HVAC, Gasses* and Compressed Air, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems, Food & Beverage.

Alternative terminology:
Isolation Valve, Lever Valve, Handle Valve, Shut off Valve, Quarter 1/4 Turn
£ 73.92 73.92 GBP
DN20 (3/4" NB) ASA150 FLANGED 2PC ISO TOP LEVER OP. BALL VALVE LEVER OP SS 316
Flanged both ends: 3/4" ASA150
Suits an outside diameter (OD) of: 26.9mm
Face to face: 117.1mm
Construction: 2 Piece
Body Material: CF8/CF8M (316) Stainless
Bore: Full Bore
Internals: PTFE Seals
Investment Casting
Blowout proof stem
ISO Mount Top Works for actuation
£ 243.04 243.04 GBP
DN20 (3/4" NB) ASA150 FLANGED 2PC LEVER OP. BALL VALVE LEVER OP SS 316
Flanged both ends: 3/4" ASA 150
Suits an outside diameter (OD) of: 26.9mm
PCD: 69.8mm Ø (ANSI 150)
Face to face: 117.1mm
Construction: 2 Piece
Body Material: CF8/CF8M (316) Stainless
Bore: Full Bore
Internals: PTFE Seals
Investment Casting
Blowout proof stem
£ 243.04 243.04 GBP
DN20 (3/4" NB) ASA150 RF BLANK FLANGE CS A105N TAPPED 1/2" BSPT CENTRE HOLE (EUROPEAN ORIGIN)
Suits an outside diameter (OD) of: 26.9mm
Material: CS
Grade: A105 N
Standards: ASME B16.9 / ASA150
Flange Face: Raised
Bolt Holes: 4 off 15.7mm Ø
PCD: 69.8mm
Flange Diameter: 98.5mm
Flange Thickness: 12.7mm
Certification Available: 3.1 Material Certification
Origin: European (EU)

Alternative terminology:
Blind, Blank, Drilled & Tapped, BSPT Female, Test Plate, Blanking Flange, Mild steel, Carbon Steel, Termination, RFB
£ 70.00 70.0 GBP
DN20 (3/4" NB) BSP (FXF) 3PC BALL VALVE LEVER OP. SS 316
£ 134.61 134.61 GBP
DN20 (3/4" NB) BSP 150# (FXF) CONE SEAT UNION SS 316
Thread: 3/4" BSPP Female x Female
Suits an outside diameter (OD) of: 26.7mm
Material: Stainless
Grade: 316
£ 22.40 22.4 GBP
DN20 (3/4" NB) BSP 150# (FXF) ELBOW 45° SS 316
Thread: 3/4" BSPP Female x Female
Suits an outside diameter (OD) of: 26.9mm
Material: Stainless
Grade: 316
Elbow Angle: 45° (Degree)

Standards:
Nominal Bore, Threaded, Elbow, 45°, 45 Deg, Screwed, Low Pressure, 150 psi
£ 8.26 8.26 GBP
DN20 (3/4" NB) BSP 150# (FXF) ELBOW 90° SS 316
Thread: 3/4" BSPP Female x Female
Suits an outside diameter (OD) of: 26.9mm
Material: Stainless
Grade: 316
Elbow Angle: 90° (Degree)

Standards:
Nominal Bore, Threaded, Elbow, 90°, 90 Deg, Screwed, Low Pressure, 150 psi
£ 8.12 8.12 GBP
DN20 (3/4" NB) BSP 150# (MXF) CONE SEAT UNION SS 316
Thread: 3/4" BSPP Female x Female
Suits an outside diameter (OD) of: 26.7mm
Material: Stainless
Grade: 316

Alternative terminology:
Male x Female, MF, MXF, Union, Threaded, Screwed, Street Union
£ 23.80 23.8 GBP
DN20 (3/4" NB) BSP 150# (MXF) ELBOW 90° SS 316
Side One Thread: 3/4" BSPT Male
Side Two Thread: 3/4" BSPP Female
Both Sides Suit an outside diameter (OD) of: 26.9mm
Male x Female Elbow, Also known as a 'Street Elbow '
Material: Stainless
Grade: 316

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi
£ 11.97 11.97 GBP
DN20 (3/4" NB) BSP 150# BARREL NIPPLE SS 316
Thread: 3/4" BSPT Male x Male
Suits an outside diameter (OD) of: 26.7mm
Material: Stainless
Grade: 316
£ 7.42 7.42 GBP
DN20 (3/4" NB) BSP 150# EQUAL FULL SOCKET SS 316
Thread: 3/4" BSP Female x Female
Suits an outside diameter (OD) of: 26.7mm
Material: Stainless
Grade: 316
£ 7.42 7.42 GBP
DN20 (3/4" NB) BSP 150# HALF SOCKET SS 316
Thread: 3/4" BSP Female x Female
Suits an outside diameter (OD) of: 26.7mm
Material: Stainless
Grade: 316
£ 5.32 5.32 GBP
DN20 (3/4" NB) BSP 150# HEX CAP END SS 316
Thread: 3/4" BSPP Female
Suits an outside diameter (OD) of: 26.9mm
Material: Stainless
Grade: 316
£ 7.49 7.49 GBP
DN20 (3/4" NB) BSP 150# HEX HEAD PLUG SS 316
£ 6.37 6.37 GBP
DN20 (3/4" NB) BSP 150# HEX NIPPLE SS 316
£ 7.70 7.7 GBP
DN20 (3/4" NB) BSP 150# SQUARE HEAD PLUG SS 316
£ 6.37 6.37 GBP
DN20 (3/4" NB) BSP 150# WELD NIPPLE SS 316
Side One Thread: 3/4" BSPT Male
Side Two Plain: 3/4" Buttweld
Both sides suit an outside diameter (OD) of: 26.9mm
Material: Stainless
Grade: 316

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 150 psi
£ 5.88 5.88 GBP
DN20 (3/4" NB) BSP 2PC (FXF) BRASS BALL VALVE YELLOW LEVER
£ 23.31 23.31 GBP
DN20 (3/4" NB) BSP 2PC (MXM) BRASS BALL VALVE BLUE LEVER
£ 85.40 85.4 GBP
DN20 (3/4" NB) BSP BLACK HEAVY W/S BARREL NIPPLE (40mm LONG)
Threaded both sides: 3/4" BSPT Male x Male
Suits an outside diameter (OD) of: 26.9mm
Overall Length: 40mm
Material: Wrought Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 300 psi, Wrought Iron, EN 10241 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Heavy, Heavyweight, Weldable, Nipple, Equal, Straight, Threaded, Screwed, Fittings.
£ 5.18 5.18 GBP
DN20 (3/4" NB) BSP BLACK HEAVY W/S BARREL NIPPLE (50mm LONG)
Threaded both sides: 3/4" BSPT Male x Male
Suits an outside diameter (OD) of: 26.9mm
Overall Length: 50mm
Material: Wrought Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 300 psi, Wrought Iron, EN 10241 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Heavy, Heavyweight, Weldable, Nipple, Equal, Straight, Threaded, Screwed, Fittings.
£ 4.13 4.13 GBP
DN20 (3/4" NB) BSP BLACK HEAVY W/S BARREL NIPPLE (60mm LONG)
Threaded both sides: 3/4" BSPT Male x Male
Suits an outside diameter (OD) of: 26.9mm
Overall Length: 60mm
Material: Wrought Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 300 psi, Wrought Iron, EN 10241 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Heavy, Heavyweight, Weldable, Nipple, Equal, Straight, Threaded, Screwed, Fittings.
£ 5.32 5.32 GBP
DN20 (3/4" NB) BSP BLACK HEAVY W/S BARREL NIPPLE (80mm LONG)
Threaded both sides: 3/4" BSPT Male x Male
Suits an outside diameter (OD) of: 26.9mm
Overall Length: 80mm
Material: Wrought Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 300 psi, Wrought Iron, EN 10241 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Heavy, Heavyweight, Weldable, Nipple, Equal, Straight, Threaded, Screwed, Fittings.
£ 5.81 5.81 GBP
DN20 (3/4" NB) BSP BLACK HEAVY W/S BARREL NIPPLE (100mm LONG)
Threaded both sides: 3/4" BSPT Male x Male
Suits an outside diameter (OD) of: 26.9mm
Overall Length: 100mm
Material: Wrought Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 300 psi, Wrought Iron, EN 10241 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Heavy, Heavyweight, Weldable, Nipple, Equal, Straight, Threaded, Screwed, Fittings.
£ 6.02 6.02 GBP
DN20 (3/4" NB) BSP BLACK HEAVY W/S BARREL NIPPLE (120mm LONG)
Threaded both sides: 3/4" BSPT Male x Male
Suits an outside diameter (OD) of: 26.9mm
Overall Length: 120mm
Material: Wrought Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 300 psi, Wrought Iron, EN 10241 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Heavy, Heavyweight, Weldable, Nipple, Equal, Straight, Threaded, Screwed, Fittings.
£ 6.51 6.51 GBP
DN20 (3/4" NB) BSP BLACK HEAVY W/S BARREL NIPPLE (150mm LONG)
Threaded both sides: 3/4" BSPT Male x Male
Suits an outside diameter (OD) of: 26.9mm
Overall Length: 150mm
Material: Wrought Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 300 psi, Wrought Iron, EN 10241 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Heavy, Heavyweight, Weldable, Nipple, Equal, Straight, Threaded, Screwed, Fittings.
£ 7.56 7.56 GBP
DN20 (3/4" NB) BSP BLACK HEAVY W/S BARREL NIPPLE (180mm LONG)
Threaded both sides: 3/4" BSPT Male x Male
Suits an outside diameter (OD) of: 26.9mm
Overall Length: 180mm
Material: Wrought Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 300 psi, Wrought Iron, EN 10241 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Heavy, Heavyweight, Weldable, Nipple, Equal, Straight, Threaded, Screwed, Fittings.
£ 8.40 8.4 GBP
DN20 (3/4" NB) BSP BLACK HEAVY W/S BARREL NIPPLE (200mm LONG)
Threaded both sides: 3/4" BSPT Male x Male
Suits an outside diameter (OD) of: 26.9mm
Overall Length: 200mm
Material: Wrought Iron
Finish: Black Self Colour

Standards:
Nominal Bore, Threaded, Screwed, Low Pressure, 300 psi, Wrought Iron, EN 10241 & EN 10226-1

Applications:
Heating and Plumbing, HVAC, Oil, Gas, Agricultural Irrigation, Fuel and Oils, Cooling, Marine, Fire Protection Sprinkler Systems.

Alternative terminology:
Malleable, Iron, Heavy, Heavyweight, Weldable, Nipple, Equal, Straight, Threaded, Screwed, Fittings.
£ 9.45 9.45 GBP