Internal diameter (ID) of: 27mm
Material: Carbon Steel
Grade: A105 N Forging
Standards: JIS 10K / ANSI 300
Flange Face: Raised both sides
Bolt Holes: 4 off 20mm Ø
PCD: 90mm
Flange Diameter: 125mm
Flange Thickness: 30mm including raised faces (27.4mm Flange Body)
Country of origin: Europe
Certification Available: 3.1 BS EN 10204 Material Certification

Flanged both ends: 1/2" ASA150
Suits an outside diameter (OD) of: 21.3mm
Face to face: 117.1mm
Construction: 2 Piece
Body Material: CF8/CF8M (316) Stainless
Bore: Full Bore
Internals: PTFE Seals
Investment Casting
Blowout proof stem
ISO Mount Top Works for actuation

Flanged both ends: 1/2" ASA150
Suits an outside diameter (OD) of: 21.3mm
PCD: 60.3mm Ø (ANSI 150)
Face to face: 108mm
Construction: 2 Piece
Body Material: CF8/CF8M (316) Stainless
Bore: Full Bore
Internals: PTFE Seals
Investment Casting
Blowout proof stem

Flanged both ends: 1/2" PN16
Suits an outside diameter (OD) of: 21.3mm
PCD: 65mm Ø (PN10, PN16, PN40)
Face to face: 115mm
Construction: 2 Piece
Body Material: CF8/CF8M (316) Stainless
Bore: Full Bore
Internals: PTFE Seals
Investment Casting
Blowout proof stem

Flanged both ends: 3/4" ASA150
Suits an outside diameter (OD) of: 26.9mm
Face to face: 117.1mm
Construction: 2 Piece
Body Material: CF8/CF8M (316) Stainless
Bore: Full Bore
Internals: PTFE Seals
Investment Casting
Blowout proof stem
ISO Mount Top Works for actuation

Flanged both ends: 3/4" ASA 150
Suits an outside diameter (OD) of: 26.9mm
PCD: 69.8mm Ø (ANSI 150)
Face to face: 117.1mm
Construction: 2 Piece
Body Material: CF8/CF8M (316) Stainless
Bore: Full Bore
Internals: PTFE Seals
Investment Casting
Blowout proof stem

Suits an outside diameter (OD) of: 26.9mm
Material: CS
Grade: A105 N
Standards: ASME B16.9 / ASA150
Flange Face: Raised
Bolt Holes: 4 off 15.7mm Ø
PCD: 69.8mm
Flange Diameter: 98.5mm
Flange Thickness: 12.7mm
Certification Available: 3.1 Material Certification
Origin: European (EU)

Alternative terminology:
Blind, Blank, Drilled & Tapped, BSPT Female, Test Plate, Blanking Flange, Mild steel, Carbon Steel, Termination, RFB

Flanged both ends: 3/4" PN16
Suits an outside diameter (OD) of: 26.9mm
PCD: 75mm Ø (PN10, PN16, PN40)
Face to face: 120mm
Construction: 2 Piece
Body Material: CF8/CF8M (316) Stainless
Bore: Full Bore
Internals: PTFE Seals
Investment Casting
Blowout proof stem

Suits an outside diameter (OD) of: 26.9mm
Material: CS
Grade: A105 N
Standards: ANSI / ASA150
Flange Face: Raised
Bolt Holes: 4 off 15.7mm Ø
PCD: 69.8mm
Flange Diameter: 98.5mm
Flange Thickness: 12.7mm
Certification Available: 3.1 Material Certification
Origin: European (EU)

Alternative terminology:
Raised Face, Socket Weld SW, Weld on, Mild Steel, Carbon Steel

Suits an outside diameter (OD) of: 26.9mm
Material: CS
Grade: A105 N
Standards: ANSI / ASA150
Flange Face: Raised
Bolt Holes: 16 off 15.7mm Ø
PCD: 69.8mm
Flange Diameter: 98.5mm
Flange Thickness: 12.7mm
Certification Available: 3.1 Material Certification
Origin: European (EU)

Alternative terminology:
Raised Face, Weld Neck, Weld on, Mild Steel, Carbon Steel

Flanged both ends: 1" ANSI 150
Suits an outside diameter (OD) of: 33.4mm
PCD: 79.4mm Ø (ASA 150)
Face to face: 127mm
Construction: 2 Piece
Body Material: CF8/CF8M (316) Stainless
Bore: Full Bore
Internals: PTFE Seals
Investment Casting
Blowout proof stem

Blanking / Blind Flange
Material: Stainless
Grade: 304
Standards: ASME B16.9 / ASA150
Flange Face: Raised
Bolt Holes: 4 off to suit 1/2"⌀ or M12 Bolts
PCD: 79.4mm
Flange Diameter: 107.9mm
Flange Thickness: 17.5mm
Certification Available: 3.1 BS EN 10204 Material Certification

Suits an outside diameter (OD) of: 33.4mm
Material: Mild Steel
Grade: A105 N
Standards: ANSI / ASA150
Flange Face: Raised
Bolt Holes: 4 off to suit M16 Bolts
PCD: 79.4mm
Flange Diameter: 123.8mm
Flange Thickness: 17.46mm
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Slip on, Bossed Flange, Weld on, Mild Steel, Carbon Steel

Suits an outside diameter (OD) of: 33.4mm
Thread Type: BSP Parallel
Material: Stainless
Grade: 316
Standards: PN10/16/25/40 - EN1092-1
Flange Face: Raised
Bolt Holes: 4 off to suit M12 Bolts
PCD: 85mm
Flange Diameter: 115mm
Flange Thickness: 16mm
Certification Available: 3.1 BS EN 10204 Material Certification

Suits an outside diameter (OD) of: 33.4mm or 25.4mm
Material: Rubber
Grade: EPDM
Standards: EN1092-1
Bolt Holes: 4 off to suit M12 Bolts
PCD: 85mm
Flange Diameter: 115mm
Gasket Thickness: 3mm

Blanking / Blind Flange
Material: Stainless
Grade: 316
Standards: EN1092-1
Flange Face: Raised
Bolt Holes: 4 off to suit M12 Bolts
PCD: 85mm
Flange Diameter: 115mm
Flange Thickness: 16mm
Certification Available: 3.1 BS EN 10204 Material Certification

Suits an outside diameter (OD) of: 33.4mm
Material: Stainless
Grade: 316
Standards: EN1092-1
Flange Face: Raised
Bolt Holes: 4 off to suit M12 Bolts
PCD: 85mm
Flange Diameter: 115mm
Flange Thickness: 16mm
Certification Available: 3.1 BS EN 10204 Material Certification

Suits an outside diameter (OD) of: 33.4mm
Suits Wall Thickness (WT): Schedule 10s
Material: Stainless
Grade: 316
Standards: EN1092-1
Flange Face: Raised
Bolt Holes: 4 off to suit M12 Bolts
PCD: 85mm
Flange Diameter: 115mm
Flange Thickness: 16mm
Certification Available: 3.1 BS EN 10204 Material Certification

Flanged both ends: 1" PN16
Suits an outside diameter (OD) of: 33.4mm
PCD: 85mm Ø (PN10, PN16, PN40)
Face to face: 125mm
Construction: 2 Piece
Body Material: CF8/CF8M (316) Stainless
Bore: Full Bore
Internals: PTFE Seals
Investment Casting
Blowout proof stem

Suits an outside diameter (OD) of: 33.4mm
Material: CS
Grade: A105 N
Standards: ANSI / ASA300
Flange Face: Raised
Bolt Holes: 16 off 19mm Ø
PCD: 88.9mm
Flange Diameter: 123.9mm
Flange Thickness: 17.5mm
Certification Available: 3.1 Material Certification
Origin: European (EU)

Alternative terminology:
Raised Face, Weld Neck, Weld on, Mild Steel, Carbon Steel

Flanged both ends: 1.1/4" ASA 150
Suits an outside diameter (OD) of: 42.4mm
PCD: 88.9mm Ø (ANSI 150)
Face to face: 140mm
Construction: 2 Piece
Body Material: CF8/CF8M (316) Stainless
Bore: Full Bore
Internals: PTFE Seals
Investment Casting
Blowout proof stem

Suits an outside diameter (OD) of: 42.4mm
Material: Mild Steel
Grade: S235 JR
Standards: EN1092-1
Flange Face: Raised
Bolt Holes: 4 off to suit M16 Bolts
PCD: 100mm
Flange Diameter: 140mm
Flange Thickness: 16mm
Certification Available: 2.1 BS EN 10204 Material Certification

Alternative terminology:
Slip on, Plate Flange, Weld on, Mild Steel, Carbon Steel

Flanged both ends: 1.1/4" PN16
Suits an outside diameter (OD) of: 42.4mm
PCD: 100mm Ø (PN10, PN16, PN40)
Face to face: 130mm
Construction: 2 Piece
Body Material: CF8/CF8M (316) Stainless
Bore: Full Bore
Internals: PTFE Seals
Investment Casting
Blowout proof stem

Flanged both ends: 1.1/2" ASA 150
Suits an outside diameter (OD) of: 48.3mm
PCD: 98.4mm Ø (ANSI 150)
Face to face: 166mm
Construction: 2 Piece
Body Material: CF8/CF8M (316) Stainless
Bore: Full Bore
Internals: PTFE Seals
Investment Casting
Blowout proof stem

Blanking / Blind Flange
Material: Carbon Steel
Grade: A105N
Standards: ASME B16.9 / ASA150
Flange Face: Raised
Bolt Holes: 4 off 16mm Ø
PCD: 98.4mm
Flange Diameter: 127mm
Flange Thickness: 19mm
Certification Available: 3.1 BS EN 10204 Material Certification
Origin: European (EU)

Alternative terminology:
Blind, Blank, Blanking Flange, Mild steel, Carbon Steel, Termination, RFB

Suits an outside diameter (OD) of: 48.3mm
Material: CS
Grade: A105N
Standards: ANSI / ASA150
Flange Face: Raised
Bolt Holes: 4 off 16mm Ø
PCD: 98.4mm
Flange Diameter: 127mm
Flange Thickness: 19mm
Certification Available: 3.1 BS EN 10204 Material Certification
Origin: European (EU)

Alternative terminology:
Socket Weld, SW Flange, Weld on, Mild Steel, Carbon Steel

Suits an outside diameter (OD) of: 48.3mm
Material: Mild Steel
Grade: S235 JR
Standards: EN1092-1
Flange Face: Raised
Bolt Holes: 4 off to suit M16 Bolts
PCD: 110mm
Flange Diameter: 150mm
Flange Thickness: 18mm
Certification Available: 2.1 BS EN 10204 Material Certification

Alternative terminology:
Slip on, Plate Flange, Weld on, Mild Steel, Carbon Steel

Flanged both ends: 1.1/2" PN16
Suits an outside diameter (OD) of: 48.3mm
PCD: 110mm Ø (PN10, PN16, PN40)
Face to face: 140mm
Construction: 2 Piece
Body Material: CF8/CF8M (316) Stainless
Bore: Full Bore
Internals: PTFE Seals
Investment Casting
Blowout proof stem

Flanged both ends: ASA150
Suits an outside diameter (OD) of: 60.3mm
Face to face: 178mm
Construction: 2 Piece
Body Material: CF8/CF8M (316) Stainless
Bore: Full Bore
Internals: PTFE Seals
Investment Casting
Blowout proof stem

Flanged both ends: 2" ASA150
Suits an outside diameter (OD) of: 60.3mm
Face to face: 178mm
Construction: 2 Piece
Body Material: CF8/CF8M (316) Stainless
Bore: Full Bore
Internals: PTFE Seals
Investment Casting
Blowout proof stem
ISO Mount Top Works for actuation

Flanged both ends: 2" ASA150
Suits an outside diameter (OD) of: 60.3mm
PCD: 120.6mm Ø (ANSI 150)
Face to face: 178mm
Construction: 2 Piece
Body Material: CF8/CF8M (316) Stainless
Bore: Full Bore
Internals: PTFE Seals
Investment Casting
Blowout proof stem

Suits an outside diameter (OD) of: 60.3mm
Construction: Cast Steel
Body Material: Carbon Steel WCB
To suit flanges: Raised Face (RF) ASA150
Face to Face: 178mm
Operation: Handwheel Operated
Bore: Full Bore
Design Standard: API Trim No. 8 (API 600)
Bolted bonney, Outside Screw & Yoke (OS&Y)
Rising Stem

Max Pressure / Temperature:
38°C at 19.65 bar
200°C at 13.78 bar

Testing (API598)
Shell Test - Hydrostatic 3.1
Seat Test - Hydrostatic 2.2
Seat Test - Pneumatic (Air) 0.6

Blanking / Blind Flange
Material: Carbon Steel
Grade: A105N
Standards: ASME B16.9 / ASA150
Flange Face: Raised
Bolt Holes: 4 off to suit 5/8"⌀ or M16 Bolts
PCD: 120.65mm
Flange Diameter: 152.4mm
Flange Thickness: 19.0mm
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Blind, Blank, Blanking Flange, Mild steel, Carbon Steel, Termination, RFB

Suits an outside diameter (OD) of: 60.3mm
Material: Stainless
Grade: 316
Standards: ASME B16.9 / ASA150
Flange Face: Raised
Bolt Holes: 4 off to suit 5/8" ⌀ or M16 Bolts
PCD: 120.65mm
Flange Diameter: 152.4mm
Flange Thickness: 19.0mm
Certification Available: 3.1 BS EN 10204 Material Certification

Suits an outside diameter (OD) of: 60.3mm
Material: Mild Steel
Grade: A105 N
Standards: ANSI / ASA150
Flange Face: Raised
Bolt Holes: 4 off to suit M16 Bolts
PCD: 120.65mm
Flange Diameter: 152mm
Flange Thickness: 19.05mm
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Slip on, Bossed Flange, Weld on, Mild Steel, Carbon Steel

Suits an outside diameter (OD) of: 60.3mm
Material: Stainless
Grade: 304
Standards: ASME B16.9 / ASA150
Flange Face: Raised
Bolt Holes: 4 off to suit 5/8" ⌀ or M16 Bolts
PCD: 120.65mm
Flange Diameter: 152.4mm
Flange Thickness: 19.0mm
Certification Available: 3.1 BS EN 10204 Material Certification

Suits an outside diameter (OD) of: 60.3mm
Material: Carbon Steel
Grade: A105N
Standards: ANSI / ASA150
Flange Face: Raised
Bolt Holes: 4 off 19mm Ø
PCD: 120.6mm
Flange Diameter: 152.4mm
Flange Thickness: 19mm
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Slip on, Bossed Flange, Weld on, Mild Steel, Carbon Steel

Suits an outside diameter (OD) of: 60.3mm
Material: CS
Grade: A105N
Standards: ANSI / ASA150
Flange Face: Raised
Bolt Holes: 4 off 19mm Ø
PCD: 120.6mm
Flange Diameter: 152.4mm
Flange Thickness: 19mm
Certification Available: 3.1 BS EN 10204 Material Certification
Origin: European (EU)

Alternative terminology:
Socket Weld, SW Flange, Weld on, Mild Steel, Carbon Steel

Suits an outside diameter (OD) of: 60.3mm
Construction: Spring Assisted Duo Disc Check Valve (NRV / Non-Return Valve)
Body Material: WCB Carbon Steel
Disc Material: Cast Stainless Steel to ASTM A351 Gr. CF8M
To suit flanges: ASA150
Face to Face (Thickness): 60mm
Operation: Automatic
Seat: Integral + AWS A5.9 ER316 Stainless Steel Overlay
Spring: Inconel 600

Max Pressure / Temperature:
38°C at 19.65 bar
200°C at 13.78 bar

Max working pressure: 19.65 bar

Suits an outside diameter (OD) of: 60.3mm
Material: CS
Grade: A105 N
Standards: ASME B16.9 / ASA1500
Flange Face: Raised
Bolt Holes: 8 off 25.4mm Ø
PCD: 165.1mm
Flange Diameter: 215.9mm
Flange Thickness: 38.1mm
Certification Available: 3.1 Material Certification
Origin: European (EU)

Alternative terminology:
Blind, Blank, Drilled & Tapped, BSPT Female, Test Plate, Blanking Flange, Mild steel, Carbon Steel, Termination, RFB

Suits an outside diameter (OD) of: 60.3mm
Material: CS
Grade: A105N
Standards: ANSI / ASA1500
Flange Face: Raised
Bolt Holes: 8 off 25.4mm Ø
PCD: 165.1mm
Flange Diameter: 215.9mm
Flange Thickness: 38.1mm
Certification Available: 3.1 BS EN 10204 Material Certification
Origin: European (EU)

Alternative terminology:
Socket Weld, Raised Face Flange, Weld on, Mild Steel, Carbon Steel

Suits an outside diameter (OD) of: 60.3mm
Thread Type: BSP Taper
Material: Stainless
Grade: 316
Standards: PN10/16 - EN1092-1
Flange Face: Raised
Bolt Holes: 4 off to suit M16 Bolts
PCD: 125mm
Flange Diameter: 165mm
Flange Thickness: 18mm
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Threaded, Screwed Flange, Tapped, BSPT Taper, Stainless steel

Suits an outside diameter (OD) of: 60.3mm
Construction: Spring Assisted Swing Check Valve (NRV / Non-Return Valve)
Body Material: Stainless Steel 316
To suit flanges: PN10/16 & ASA150
Face to Face (Thickness): 14mm
Operation: Automatic
Seal: FPM

Working Temperature
-20°C to +180°C (12 Bar at 180°c)

Max working pressure: 16 bar

Suits an outside diameter (OD) of: 60.3mm
Material: Mild Steel
Grade: A105 N
Standards: EN1092-1
Flange Face: Flat
Bolt Holes: 4 off to suit M16 Bolts
PCD: 125mm
Flange Diameter: 165mm
Flange Thickness: 18mm
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Blanking Flange, Termination, Blind Flange, FFB , Flat Face

Suits an outside diameter (OD) of: 60.3mm
Material: Mild Steel
Grade: S235 JR
Standards: EN1092-1
Flange Face: Flat
Bolt Holes: 4 off to suit M16 Bolts
PCD: 125mm
Flange Diameter: 165mm
Flange Thickness: 18mm
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Blanking Flange, Termination, Blind Flange, FFB , Flat Face

Suits an outside diameter (OD) of: 60.3mm
Material: Mild Steel
Grade: A105 N
Standards: EN1092-1
Flange Face: Flat
Bolt Holes: 4 off to suit M16 Bolts
PCD: 125mm
Flange Diameter: 165mm
Flange Thickness: 18mm
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Slip on Flange, Weld on, Mild Steel, Carbon Steel, Flat Faced, FFSO

Flanged both ends: 2" PN16
Suits an outside diameter (OD) of: 60.3mm
Face to face: 150mm
Construction: 2 Piece
Body Material: CF8/CF8M (316) Stainless
Bore: Full Bore
Internals: PTFE Seals
Investment Casting
Blowout proof stem
ISO Mount Top Works for actuation

Suits an outside diameter (OD) of: 60.3mm
Construction: Cast Iron Gate Valve
Body Material: Cast Iron
To suit flanges: PN16
Face to Face: 150mm
Operation: Handwheel Operated
Design Standard: Face to face DIN 3202-F4, Non-Rising Stem

Working Temperature
10°C to +120°C at 16 bar
-10°C to +200°C at 12.8 bar

Max working pressure: 16 bar

Suits an outside diameter (OD) of: 60.3mm
Material: Carbon Steel
Grade: A105 N
Standards: EN1092-1
Flange Face: Raised
Bolt Holes: 4 off to suit M16 Bolts
PCD: 125mm
Flange Diameter: 165mm
Flange Thickness: 18mm
Certification Available: 3.1 BS EN 10204 Material Certification

Alternative terminology:
Slip on, Plate Flange, Weld on, Mild Steel, Carbon Steel

Suits an outside diameter (OD) of: 60.3mm
Material: Mild Steel
Grade: S235 JR
Standards: EN1092-1
Flange Face: Raised
Bolt Holes: 4 off to suit M16 Bolts
PCD: 125mm
Flange Diameter: 165mm
Flange Thickness: 18mm
Certification Available: 2.1 BS EN 10204 Material Certification

Alternative terminology:
Slip on, Plate Flange, Weld on, Mild Steel, Carbon Steel

Suits an outside diameter (OD) of: 60.3mm
Material: Stainless
Grade: 316
Standards: EN1092-1
Flange Face: Raised
Bolt Holes: 4 off to suit M16 Bolts
PCD: 125mm
Flange Diameter: 165mm
Flange Thickness: 18mm
Certification Available: 3.1 BS EN 10204 Material Certification

Suits an outside diameter (OD) of: 60.3mm
Suits Wall Thickness (WT): Schedule 40s
Material: Stainless
Grade: 304
Standards: ASME B16.9 / ASA150
Flange Face: Raised
Bolt Holes: 4 off to suit M16 Bolts
PCD: 120.65mm
Flange Diameter: 152.4mm
Flange Thickness: 19.0mm
Certification Available: 3.1 BS EN 10204 Material Certification